Mechanical and Physical Properties: Good looks are one thing – performance and ease of application is another. We claim that Buck’s Ballast takes the blue ribbon here, as well.
Weight: Light weight nutshell ballast is susceptible to static charge. The ballast will often jump – and we mean, physically fly through the air – from roadbed to the rails or tops or ends of the ties. The more you try to drag it away, the more static you create! Maddening. But Buck’s Ballast is massive, weighty stuff, and stays put.
Magnetic Attraction: Modelers will recognize a possible hazard with a real mineral based product like Buck’s. Stray particles with a metallic content may be drawn toward the magnets of your locomotive motors. This, in fact, is a complaint about a competing, mineral based product. Like a track nail, staple, or any similar small metal object, there is the possibility of creating a short circuit if the object is drawn into an open frame motor or other parts of the mechanism. And this is why Buck’s takes the extra step of passing the ballast through a magnetic field in excess of 200 pounds of pulling force. Buck’s is both physically washed and magnetically cleaned.
Ease and Speed of Application: The weight alone of Buck’s Ballast makes it resistant to flooding away when glue and water mixtures are applied to it. The irregular shape of the stones has an inter-locking property that makes them resist rolling. Buck’s is more stable on the slope of your roadbed. One of our test panel reported, “. . . I think this un-evenness helps the ballast hold its shape when applied . . .”.
With enough force, of course, you could blast away the ballast with a heavy squirt of glue mixture, the same as chasing gravel with a garden hose. But in actual practice, you can be more aggressive in applying the glue. There is no need, really, to apply a bead of glue along the bottom edge of the slope and allow it to “wick into” the particles above by osmosis. Thus, your work goes more quickly.
In fact, Buck’s can be applied in in just one pass – between the rails and along the slopes on both sides. No need to do the middle and then the sides as separate operations. Apply dry ballast, wet it, then glue it. See link to the very simple 3 step instruction sheet, below.
Some of our test panel of product evaluators noted that Buck’s Ballast seems to have some powder or dust in the mix. It DOES. Although the product originates with washed stone from the quarry, we wash it again to remove residual dirt and clay. Even so, there is still some powder which is visually present in the product you receive. At first, we were concerned. But, we soon observed that the powder actually combines with the glue to produce a very solid bond among the larger stones, resulting in a secure finished job. It washes into and among the stones, disappearing from view in the finished work. Your project therefore looks good and is literally rock-solid. Perfect!
Finally, as veterans of the hobby will know, it is nearly impossible to shape the profile of the light weight product while it is still wet. The product will simply stick to you, or whatever shaping tool you use. However, you CAN “get away with” some manipulation of Buck’s Ballast. A popsicle stick or similar tool (metal is preferable) may be used to conform Buck’s Ballast to the profile of the roadbed after application of glue, and before the glue has dried. Some stone will stick to your tool – but not very much. So feel free to gently tamp, scrape and shape.
Economy of Application: Products from vegatable matter and similar light weight products require a certain layer thickness to give a desired profile when dry, so make them less “touchy” while being applied. But the weight of Buck’s Ballast means you can use a thinner layer to cover the road bed. And, pound for pound, Buck’s is much less expensive to use and to buy than alternative products.
New Ballasting Methods: Everyone has developed their own favorite way to apply ballast, and no doubt will do the same with Buck’s. However, owing to the advantages discussed above, we have prepared a set of application instructions which fully exploit Buck’s unique properties, for speedy and convenient application. Click this link for 3 Easy Steps to Ballast Application.
Test Results: Buck’s Ballast has been fully tested by a panel of modelers, as well as a few early customers. We have selected representative reports, including what some regarded as detractions, together with our response to problems or issues raised. Click this Test Panel Reports link to see the document.
Pricing: One unit of Buck’s Ballast weighs about 2 pounds (enough for 30-50′ of track, depending on application). Product is delivered in a heat sealed, heavy duty, 8 mil thick poly bag. Shipping is included in the price.
1-4 units: 12.00 ea.
5+ units: 10.00 ea.
Shipping is included in the price.
Clubs: Special pricing available. Please contact us.
Dealers: Dealer orders are welcome, and receive standard trade discounts. Please contact us.